Publicité
Table 3
Guidance and declaration of manufacturer-electromagnetic immunity
The device is intended for use in the electromagnetic environment specified
below. The customer or the user of the device should assure that it is used in such
an environment.
IMMUNI-
IEC 60601
TY test
test level
RF par
3V for 0.15-
conduc-
80MHz; 6V
tion CEI
in ISM and
61000-
amateur
4-6
radio bands
between0.15-
80MHz
Radiated
385 MHz, 27
RF IEC
V/m
61000-
450 MHz, 28
4-3
V/m
710 MHz,745
MHZ,780 MHz
9V/m
810 MHz,870
MHZ,930 MHz
28V/m
1720 MHz,1845
MHZ,1970 MHz
28V/m
2450 MHz, 28 V
(m)
5240 MHz,
5500 MHZ,
5785 MHz
9 V/m
Compliance
level
3V for 0.15-
80MHz; 6V
in ISM and
amateur
radio bands
between0.15-
80MHz
385 MHz, 27
V/m
450 MHz, 28
V/m
710 MHz,745
MHZ,780 MHz
9V/m
810 MHz,870
MHZ,930 MHz
28V/m
1720 MHz,1845
MHZ,1970 MHz
28V/m
2450 MHz, 28 V
(m)
5240 MHz,
5500 MHZ,
5785 MHz
9V/m
72
Electromagnetic environment -
guidance
Portable and mobile RF communica-
tions equipment should be used no
closer to any part of the device, inclu-
ding cables, than the recommended
separation distance calculated from the
equation applicable to the frequency of
the transmitter.
Recommended seperation distance
80 MHz to 800 MHz
800 MHz to 2,7 Ghz
where P is the maximum output power
rating of the transmitter in watts (W)
according to the transm- itter manu-
facturer and d is the recommended
separation distance in metres (m).
Field strengths from fixed RF transmit-
ters, as determined by an zelectroma-
gnetic site survey, a should be less than
the compliance level in each frequency
range.
Interference may occur in the vicinity of
equipment marked with the following
symbol:
Publicité
