Télécharger Imprimer la page

Spengler TENSONIC Manuel Utilisateur page 60

Masquer les pouces Voir aussi pour TENSONIC:

Publicité

Memory Deletion
Memory for a selected group may be deleted while in Memory Check mode.
Press and hold the "SET" button for approximately 3 seconds to delete all
memory records from the selected group. The monitor will beep indicating
successful deletion and then transfer into testing mode. To delete memories
from other groups, please refer to "Select Memory Group" on page 53. Then
press the "START/STOP" button to turn the unit off.
Note: Memory cannot be recovered once it has been deleted.
Low Battery lndicator
The unit will broadcast "Low Battery" when battery
life is depleting and unable to inflate cufffor testing.
The"
" appears simultaneously for approximately
5 seconds prior to shutting off. Replace batteries at
this time. No memory loss will occur throughout
this process.
60

Publicité

loading