Publicité
5. Deleting/Storing Test Results
User may delete their current test result due to unfavorable testing conditions
or for any other reason. To delete the last test result press the "SET" button
after result is displayed. If result is not deleted. it will automatically store by
date within the previously configured Memory Group.
Note: be sure the appropriate Memory Group selection is made prior to
testing.
If the number of tests surpasses the allotted 60 memories per group, the
most recent tests will appear first thus eliminating the oldest readings.
Power off
The"START/STOP" button can be pressed to turn off the unit in any mode.
The unit can turn off the power itself about 3 minutes no operation in any
mode.
Safety Precautlon: If pressure ln cuff becomes too extreme while testing,
press the« START/STOP « button to turn power off.
The cuff pressure wlll rapidly dlssipate once the unit is off.
58
Publicité
