Publicité
WARRANTY
The Tensonic
Blood Pressure Monitor is guaranteed for 2-years from the date of
®
purchase. If the Tensonic
nents or poor workmanship, we will repair or replace it freely. The warranty does
not cover damages to your Tensonic
Please contact local retailer for details.
ELECTROMAGNETIC COMPATIBILITY INFORMATION
The device satisfies the EMC requirements of the international standard IEC
60601-1-2. The requirements are satisfied under the conditions described in the
table below. The device is an electrical medical product and is subject to special
precautionary measures with regard to EMC which must be published in the
instructions for use. Portable and mobile HF communications equipment can
affect the device. Use of the unit in conjunction with non-approved accessories
can affect the device negatively and alter the electromagnetic compatibility.
The device should not be used directly adjacent to or between other electrical
equipment.
Table 1
Guidance and declaration of manufacturer-electromagnetic emissions
The device is intended for use in the electromagnetic environment specified
below.
The customer or the user of the device should assure that it is used in such an
environment.
Emissions test
Radiated emis-
sion CISPR 11
does not function properly due to defective compo-
®
®
Compliance Electromagnetic environment - guidance
Group 1,
The device uses RF energy only for its internal
class B.
function. Therefore, its emissions are very low
and are not likely to cause any interference in
nearby electronic equipment.
due to improper handling.
69
EN
Publicité
