Viking MI 422 PC Manuel D'utilisation page 133

2. Level:
Four safety levels can be set;
various locks and safety devices are
activated, depending on the level.
– None:
The robotic mower is unprotected.
– Low:
The anti-theft alarm is active; a PIN
code must be entered in order to link the
robotic mower and docking station, and
to reset the machine to the default
settings.
– Medium:
As "Low", but the time lock is also
active.
– High:
As "Medium", but settings can also only
be changed following entry of the PIN
code.
VIKING recommends that the
"Low", "Medium" or "High" safety
levels be set.
● Select the required level and confirm
with OK; enter the 4-digit PIN code if
necessary.
Anti-th. alarm:
If the mower is lifted or tilted by the handle
for longer than 10 seconds, the PIN query
appears. If the PIN code is not entered
within one minute, an alarm sounds and
automatic operation is switched off.
Connection lock:
PIN code query prior to linking of the
robotic mower and docking station.
Reset lock:
PIN code query prior to resetting the
machine to the factory defaults.
Time lock:
PIN code query for changing a setting if no
PIN code has been entered for more than
one month.
0478 131 9935 C - EN
Setting prot.:
PIN code query when settings are
changed.
3. GPS protection (MI 422 PC):
For switching position monitoring on
and off. ( 5.9)
Recommendation:
Always switch on GPS protection.
Before switching on, enter the
mobile phone number of the owner
in the app ( 10.) and set the
safety level to "Low", "Medium" or
"High" on the robotic mower.
4. Change PIN code:
The 4-digit PIN code can be
changed if required.
The "Change PIN code" menu item
is only displayed in the safety levels
"Low", "Medium" or "High".
● First enter the old PIN code and confirm
with OK.
● Then enter the new 4-digit PIN code
and confirm with OK.
VIKING recommends making a
note of the changed PIN code.
If the PIN code is entered
incorrectly 5 times, a 4-digit master
code is required, otherwise
automatic operation is switched off.
For the creation of a master code,
you must provide your VIKING
specialist dealer with the 9-digit
serial number and the 4-digit date,
which are displayed in the selection
window.
5. Start signal:
For switching on and off the acoustic
signal that sounds when the mowing
blade is activated.
6. Alarm signal:
For switching on and off the acoustic
signal that sounds when the robotic
mower hits an obstacle.
7. Menu signal:
For switching on and off the acoustic
click that sounds when a menu is
opened and a selection is confirmed with
OK.
8. Child lock:
For switching on and off the device that
prevents the mowing blade from running
when the machine is being played with.
Function:
If the impact sensor is triggered several
times in succession within a short time (for
example when a child is playing with the
robotic mower), the mowing blade is
switched off and the robotic mower stops
with an appropriate message.
If the impact sensor is not triggered again,
the robotic mower continues automatic
mowing after a few seconds.
9. Keylock:
When the keylock is switched on,
the buttons on the display can
only be operated if the Back
button is pressed and held and the
control pad is then pressed forwards.
The keylock is activated 2 minutes after
the last button has been pressed.
10. Link iMow and dock:
Following initial operation, the
robotic mower can only be operated
in conjunction with the installed docking
station.
Following a replacement of the docking
station or of electronic components in the
robotic mower or for operation of the
robotic mower on an additional mowing
131