Publicité
Les langues disponibles
Les langues disponibles
14
www.electrolux.com
• Heat setting display for the left front
control bar shows the heat setting. To
change the heat setting use left
front control bar.
• When you activate the function for the
first time you will get heat setting
for the front position,
position and
6. HINTS AND TIPS
6.1 Cookware
Cookware material
• correct: cast iron, steel, enamelled
steel, stainless steel, the bottom made
of multi-layer (with correct mark from a
manufacturer).
• not correct: aluminium, copper,
brass, glass, ceramic, porcelain.
for the rear position.
WARNING!
Refer to Safety chapters.
For induction cooking zones
a strong electro-magnetic
field creates the heat in the
cookware very quickly.
Use the induction cooking
zones with correct cookware.
Activating the function
To activate the function place the
cookware in the correct position on the
cooking area. Touch
above the symbol comes on. If you do not
place the cookware on the cooking area
flexible induction cooking area is set to
Deactivating the function
To deactivate the function touch
for the middle
the heat setting to
the symbol
Cookware is correct for an induction
hob if:
• some water boils very quickly on a
• a magnet pulls on to the bottom of the
Cookware dimensions
You can change the heat settings for
each position separately. The hob will
remember your heat settings next time
you activate the function.
comes on and after 2 minutes the
. The indicator above
goes off.
zone set to the highest heat setting.
cookware.
The printing on the flexible
induction cooking area may
become dirty or change
colour from sliding the
cookware. You can clean the
area in a standard way.
The bottom of the cookware
must be as thick and flat as
possible.
. The indicator
.
or set
Publicité
