Publicité
Les langues disponibles
Les langues disponibles
3. Push the lever on the distributor valve to the left to lower the jack. DWG. 8
4. After lifting the load, it is absolutely essential to rest it on appropriate support stands before performing any work
around it.
REMEMBER! THE JACK IS A LIFTING DEVICE AND NOT A SUPPORTING DEVICE!
- The operator`s employer shall provide the necessary training and supply the necessary information on use of the
jack.
- Before working with the jack, it is advisable to perform a few operations with no load in order to acquire the
sensitivity necessary to work safely with the jack.
IMPROPER USE
The air-hydraulic jack has been designed and manufactured to lift transport vehicles. Any other use of the jack, such as for
instance lifting and/or moving persons, is considered to be completely improper. Any use of the jack which does not
conform to the safety standards outlined in this manual shall be considered improper.
WARRANTY
This jack is covered by a 12-month warranty starting from the date the jack leaves our factory unless the warranty has
been activated on-line; this covers all manufacturing defects but not transport expenses, defects caused by improper use
or damage suffered during transport. For more details please see the warranty card attached to this manual.
MAINTENANCE OPERATIONS TO BE PERFORMED BY THE USER
The jack does not require specific maintenance. It is simply recommended to check the condition of the rubber pad every
so often to ensure it is not cracked or cut. If the rubber pad is damaged, have it replaced by contacting an authorised
service centre.
14
EN
Publicité
