Miele PW 6241 EL Schéma D'installation page 20

en - Installation notes
20
Explanation of the safety notes and warnings on the machine
Read the operating instructions
Read all the instructions, e.g. the installation
instructions
Warning, hot surfaces
Warning, voltage up to 1000 volts
Earthing
Equipotential bonding
Installation requirements
The washing machine must be installed and commissioned by a
Miele Service technician or by an authorised dealer.
The washing machine must be installed in accordance with

applicable regulations and standards. Local energy supplier and water
authority regulations must also be observed.
This washing machine must only be operated in a room that has

sufficient ventilation and which is frost-free.
This machine should not be installed or operated in any area where
there is a risk of explosion!
General operating conditions
This washing machine is intended only for use in a commercial
environment and must only be operated indoors.
- Ambient temperature: 0-40 °C
- Relative humidity: non-condensing
- Maximum height above sea level of location site: 2000 m
Depending on the nature of the installation site, sound emissions and
vibration may occur.
Tip: Have the installation site inspected and seek the advice of a
professional in instances where increased noise may cause a
nuisance.
Installation
Transport the washing machine to its installation site using a suitable
pallet truck and remove the transport packaging.