Pushing Mode; Technical Data; Advice On Product Care; Cleaning And Disinfection - Bischoff & Bischoff Togo 8010 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

TOGO
| pushing aid

5.5. Pushing mode

For pure pushing mode, the Togo can be removed from the wheelchair
as already described. Then push the wheelchair by using the push
handles on the wheelchair.
You can, however, leave the drive unit on the wheelchair and disengage
the drive motor.
16
To do so, press the lever downwards (fig. 16).
In this way, the wheelchair can be pushed without the additional
electrical drive. The wheelchair user can also move the wheelchair for
short distances with the drive engaged if necessary.

6. Technical data

Measurements and weights
Max. user weight:
Max. permitted total weight: 180 kg
Total length:
Total width:
Overall height:
Total weight wo. battery:
Weight of the battery pack:
Weight of the charger:
Tyres
Drive wheels:
Brake
Brake:
Electrics
Battery:
Operating voltage:
Operating temperature:
Charger:
Input:
Output:
32
125 kg
360 mm
490 mm (push handle)
1070 - 1170 mm
17,3 kg
2,0 kg
0,4 kg
200 x 50 mm (solid rubber)
electromagnetic
24 V 11.5 Ah lithium-ion battery pack
18.0 V - 29.4 V DC
-20°C to +45°C
HP 1202B
100-240 VAC, 50/60 Hz, 1,2 A
29,4 VDC, 2,0 A
Motor:
DC 24 V / BLDC motor, RM 90 series
Lighting system:
lighting for attaching to the wheelchair in
accordance with the German Road Traffic
Act (optional)
Driving characteristics
Speed (km/h):
1.0 to 5.5 (6 levels)
approx. 1.5 (safety limit)
Range (km)
approx. 14
Maximum safe incline (°):
6
Maximum climbing capability (°): 9
The maximum permitted overall weight is the max.
user load of the wheelchair plus the weight of the
wheelchair, up to a limit of 180 kg in total.

7. Advice on product care

7.1. Cleaning and disinfection

Make sure the Togo is switched off before starting to clean it.
The frame and coverings can be wiped using a damp cloth. In the
case of heavy soiling, use a mild cleaning agent.
To clean the wheels, use a damp brush with plastic bristles (do not
use a steel brush!).
The control unit and hand grips can be disinfected with standard
surface disinfectant.
Make sure that electric or electronic components do not come into
contact with water!
Caution! Do not use a high-pressure or steam
cleaning device.
Bischoff & Bischoff GmbH | 09.01.2020 - Revision: 1
TOGO
pushing aid |
33

Publicité

Table des Matières
loading

Table des Matières