Installation Instructions - Wilo CronoLine-IL Notice De Montage Et De Mise En Service

Screw tightening torques
Screw connection
Impeller — Shaft
Pump housing — Lantern
Lantern — Motor
Coupling
Installation and operating instructions Wilo-IL/-DL/-BL
Tightening torque
Nm ± 10%
M10 30
M12 60
M16 100
M16 100
M10 35
M12 60
M16 100
M6-10.9 12
M8-10.9 30
M10-10.9 60
M12-10.9 100
M14-10.9 170

Installation instructions

Tighten evenly and diagonally
Lightly oil the sliding surfaces, tighten
the screws evenly, keep the gap the
same on both sides.
English
37