Publicité
Les langues disponibles
Les langues disponibles
80
DSR Switch Installer/User Guide
To use History mode:
1.
Press
Ctrl-F9
2.
Press one of the following key combinations to perform the indicated action:
•
: Move to the top of the buffer.
Home
•
: Move to the bottom of the buffer.
End
•
Page Up
•
Page Down
•
Up Arrow
•
Down Arrow
•
Ctrl-F8
•
Ctrl-F9
mode enabled.
•
Ctrl-F10
mode enabled.
•
Ctrl-F11
Press
Enter
screen will reappear.
3.
When finished, press
DSRIQ-SRL module pinouts
Table C.1 lists the pinouts for the DSRIQ-SRL module.
Table C.1: DSRIQ-SRL Module Pinouts
DB9-F
Host Signal Name Description Signal Flow
Pin
1
DCD - Data Carrier Detect
2
RXD - Receive Data
3
TXD - Transmit Data
4
DTR - Data Terminal Ready
5
GND - Signal Ground
6
DSR - Data Set Ready
7
RTS - Request to Send
8
CTS - Clear to Send
9
N/C - Not Connected
All manuals and user guides at all-guides.com
. The mode will display as History.
: Move up one buffer page.
: Move down one buffer page.
: Move up one buffer line.
: Move down one buffer line.
: Enters Configuration mode. The Configuration screen will appear.
: While in Configuration mode, returns to the previous screen with History
: While in Configuration mode, returns to the previous screen with On-Line
: Clears the history buffer. If you choose this option, a warning screen will appear.
to delete the history buffer or
to exit History mode and return to On-Line mode.
Ctrl-F10
Out of SRL
Out of SRL
In to SRL
In to SRL
N/A
Out of SRL
In to SRL
Out of SRL
N/A
to cancel the action. The previous
Escape
SRL Signal Name Description
DTR - Data Terminal Ready
TXD - Transmit Data
RXD - Receive Data
DSR - Data Set Ready
GND - Signal Ground
DTR - Data Terminal Ready
CTS - Clear to Send
RTS - Request to Send
N/C - Not Connected
Publicité
