Publicité
Les langues disponibles
Les langues disponibles
56
DSR Switch Installer/User Guide
Detection thresholds
In some cases, noise in the video transmission keeps the packets/sec count up, which is indicated by
little dots changing in the area of the cursor when it is moved. Varying the threshold values may
result in "quieter" screens and can improve cursor tracking.
You can modify Noise Threshold and Priority Threshold values if you are using standard video
compression. You can also modify Block Noise Threshold and Pixel Noise Threshold values. You
can restore default threshold values by clicking Auto Adjust Video.
Block Noise Threshold and Pixel Noise Threshold
The Block Noise Threshold and Pixel Noise Threshold values set the minimum color levels in
terms of changed video blocks and pixels per thousand that are allowed.
•
The Block Noise Threshold sets the minimum color change that occurs in a single video block.
Increasing the value reduces the network bandwidth. Decreasing the value makes the size of
these artifacts smaller.
•
The Pixel Noise Threshold sets the minimum color change in a single pixel. Decreasing the
value reduces the number of low-contrast artifacts, but increases network bandwidth.
See the Adjusting the view section on page 52 for information about changing the color depth.
Automatic video adjustment
In most cases, you do not need to alter the Video Settings from the default. The system
automatically adjusts and uses the optimal video parameters. The DSR switch on-board web
interface performs best when the video parameters are set such that no (0) video packets are
transmitted for a static screen.
You can easily adjust your video parameters to ideal settings by clicking on the Auto Adjust Video
button in the Manual Video Adjust dialog box.
NOTE: You can also select Tools - Automatic Video Adjust from the Video Viewer window menu or click the
Automatic Video Adjust toolbar icon to automatically adjust the video.
Refresh Image
Clicking the Refresh Image button in the Manual Video Adjust dialog box completely regenerates
the digitized video image.
NOTE: You can also select View - Refresh from the Video Viewer window menu to refresh the image.
Video Test Pattern
Clicking the Video Test Pattern button in the Manual Video Adjust dialog box toggles a display of
a video test pattern. Click the Video Test Pattern button again to toggle back to a normal
video image.
All manuals and user guides at all-guides.com
Publicité
