Avocent DSR Mode D'emploi page 28

16
DSR Switch Installer/User Guide
Figure 3.1: OSCAR Interface Main Dialog Box
Table 3.1: Main Dialog Box Functions
Button
VMedia
Log Out
Clear
Disconnect
Setup
Commands
Selecting a target device
Use the Main dialog box to select a target device. When you select a target device, the DSR switch
reconfigures the keyboard and mouse to the settings for the selected target device.
To select a target device:
Double-click the target device name, EID or port number.
-or-
If the display order of your list is by port (the Port button is depressed), type the port number and
press .
Enter
-or-
All manuals and user guides at all-guides.com
Function
Set virtual media options and make virtual media connections. This option is only available
when a KVM session is in progress on a virtual media enabled DSR switch.
Disconnect the KVM and user sessions.
Clear all offline DSRIQ modules.
Disconnect the KVM session.
Access the Setup dialog box and configure the OSCAR interface.
Access the Commands dialog box.