Publicité
Les langues disponibles
Les langues disponibles
38
DSR Switch Installer/User Guide
4.
Select a DSRIQ module to view and click the Version button. The DSRIQ Version dialog box
shown in Figure 3.21 appears.
For more information on loading firmware, refer to Flash Upgrades section on page 67.
Figure 3.21: DSRIQ Version Dialog Box
5.
Click X to close the DSRIQ Version dialog box.
Depending on your DSRIQ module type, you may have the option of switching between USB 2.0
Speed and USB 1.1 Full Speed.
To enable or disable USB 2.0:
1.
If the OSCAR interface is not open, press
2.
Click Commands - Display Versions to open the Version dialog box shown in Figure 3.19.
3.
Click DSRIQ to open the DSRIQ Selection dialog box shown in Figure 3.20.
4.
Select a DSRIQ module to view and click the Version button. The DSRIQ Version dialog box
shown in Figure 3.21 appears.
5.
Complete either of the following options:
Click Disable to turn off USB 2.0 - and turn on USB 1.1 Full Speed.
-or-
Click Enable to turn off USB 1.1 Full Speed and turn on USB 2.0 Hi Speed.
All manuals and user guides at all-guides.com
to open the Main dialog box.
Print Screen
Publicité
