Publicité
Les langues disponibles
Les langues disponibles
XLEVEL
OMUTE
XMUTE
VIRTUAL_CONTROL
OVU
ALARM_PROTECT
ALARM_FAULT
INFO_NAME
INFO_MODEL
INFO_VERSION
INFO_MAC
ERROR
<Error ID>
Note:
INC
and
DEC
commands are replied with a
or decreased. When the
INC
or
DEC
will be produced.
<Input Channel>
<Output
Channel>
<Output
YES/NO
Channel>
<Input Channel>
<Output
Channel>
<Virtual Control>
<Value>
<Output
<Pre Vumeter
Channel>
Level>
<Output
ON/OFF
Channel>
<Output
ON/OFF
Channel>
"<Device Name>"
<Device Model>
<Firmware
Version>
<Device MAC
address>
"<Error
Description>"
DATA
command from the device with the resulting LEVEL value, after it has been increased
command tries to adjust a LEVEL value beyond its minimum or maximum limits, no reply
<Level>
Shows the current LEVEL of a Matrix point
Shows the current MUTE status of an Output Channel
YES/NO
Shows the current MUTE status of a Matrix point
Shows the Virtual Control value
<Post Vumeter
Shows the VU-meter value of an Output Channel
Level>
Shows the Protect alarm status of an Output Channel
Shows the self-diagnosis system alarm status of an
Output Channel
Shows the Device Name
Shows the Device Model
Shows the Firmware Version
Shows the Device MAC address
Informs about an error
28
(DATA
command)
Publicité
