Publicité
Les langues disponibles
Les langues disponibles
The
SET
messages don't have an automatic acknowledgement with a
sent from the EclerNet device after it has processed the
update the values itself and must send the needed
confirmation from the device.
NOTES:
• The numerical values are always integer numbers without +, –, comma or dot
symbols.
•
[PINGPONG]
is an optional parameter used to configure the device-client
communication with a periodical check, to see whether the client or the device have
terminated it. When configured this way, the device sends a
per second, and the client must answer with a
doesn't get these messages along a 10 seconds period, the communication will be
considered terminated
•
<Input Channel>
or output channel of the EclerNet device. For the NXA series it can be within the
[1..4] or [1..6] range, for 4 or 6 channel amplifiers.
•
<Preset Number>
in the EclerNet device's memory. For the NXA and NZA series it can be within the
[1..5] range.
• <Level>,
<Pre Vumeter Level>
the [0..100] range that define values in a scale equivalent to [-inf..0] dB.
•
<GPI>
&
<GPO>
the [1..4] or [1..6] range, depending on model.
•
<GPI Value>
is a numerical value within the [0..100] range that indicates the value
of an analogue GPI input. For a digital input only 0 or 100 are the possible values.
•
<GPO Value>
is a numerical value within the [0..1] range: it can only be 0 or 1
(opened or closed GPO).
•
<Rate>
is a numerical value within the [1..10] range that sets the VU-meter refresh
rate, or the number of times the vumeters' values are sent per second (by default =
3).
•
"<Device Name>"
names with blank spaces.
•
<Error ID>
is a numerical value for an error code.
•
"<Error Description>"
error description.
•
<Virtual Control>
o It can be within a [1A..4A] or [1B..4B] range for NXA 4 ch. Models.
o It can be within a [1A..6A] or [1B..6B] range for NXA 6 ch. Models.
&
<Output Channel>
is a numerical value that identifies one available Preset stored
y
<Post Vumeter Level>
are numerical values. For the NXA series GPI values can be within
is the device name inside double quotation marks, to allow for
is a text chain inside double quotation marks, containing an
is a numerical value that identifies a Virtual Control.
24
SET
command. The client must
GET
message if it requires
SYSTEM PING
SYSTEM PONG
are numerical values that identify an input
are numerical values in
DATA
message
once
message. If anyone
Publicité
