Olympia A 8250 C Mode D'emploi page 19

Troubleshooting
Fault
• Red LED (Power) does not light
up
• Device does not respond
• Foil jam
• Laminated foil is not completely
transparent
Disposal
The adjacent symbol indicates that when the product has come
to the end of its service life, the end user is responsible for dispo-
sing of it at a collection point or recycling depot authorised by the
local authorities. The symbol is only applicable for states within
the EEA. EEA = European Economic Area, which comprises the
EU member states plus Norway, Island and Liechtenstein.
All manuals and user guides at all-guides.com
Corrective measures
• Check that the power switch on
• If the fault cannot be cleared, con-
• Check the foil pockets being used
• Only use foil pockets of the size
• Ensure that the foil pocket is
• To clear the fault, follow the in-
• Laminate the same foil again to
Conformity of the equipment to the
EU directives is confirmed by the
CE symbol.
19
the rear side of the device has
been switched on. Also check that
the On/Off switch on the operating
panel has been switched on.
tact our hotline.
are the correct size.
specified.
straight when inserted in the devi-
ce.
structions in the Section "Clearing
Foil Jams".
improve the lamination result.