Publicité
Les langues disponibles
Les langues disponibles
Clearing Foil Jams
This laminator is equipped with a REV button which activates reverse run-
ning in order to quickly clear foil pockets which have become jammed.
1.
If the foil pocket jams, press the REV button.
2.
The jammed foil pocket is released and is fed back out of the insertion
slot.
3.
It will probably be necessary to then clean the unit several times as
described in the Section "Cleaning and Servicing".
4.
If foil jams occur repeatedly or jammed foil cannot be removed from the
laminator, please contact our hotline (refer to Guarantee).
Cleaning and Servicing
Deposits and residual adhesive on the transport rollers can influence the re-
sults of the laminating process. Therefore, the transport rollers must be clea-
ned regularly after use:
To do this, insert a folded piece of paper in the insertion slot. Residual adhe-
sive is removed and taken up by the paper when ejected. Repeat the pro-
cess several times.
Disconnect the power plug before starting to clean the unit with a damp
cloth. If necessary, the housing can be cleaned using a cloth moistened with
clean water with a little mild soap applied. Never use any solvents or ag-
gressive cleaning agents.
All manuals and user guides at all-guides.com
18
Publicité
