Olympia A 8250 C Mode D'emploi page 14

21 Do not laminate heat sensitive materials, such as thermal paper, in
the device.
22 Lamination of moist documents produces poor results.
23 Maintain a pause of at least 15 seconds between each lamination
process.
24 Never operate the device longer than 2 hours at a time. Then allow
the device to cool down for at least 30 minutes.
25 Only transport the device when it has cooled down.
26 Never touch hot parts of the device. Risk of burns! Handle the foil
pockets just laminated with due care and attention. They are very
hot!
27 Always switch the device off and then disconnect the power plug
before cleaning the device. Never use any solvents or aggressive
cleaning agents.
Important Information
If very soft material (such as serviettes) or very small size material is to be
laminated, we recommend inserting a folded sheet of paper in the foil pocket
too, to prevent the possibility of the document being laminated from jam-
ming. The folded edge of the sheet must be inserted into the laminator first.
ID cards and documents could loses their validity if they are laminated be-
cause the official status of the document can no longer be validated.
If you transfer the laminator to others, always hand over this operating ma-
nual with it.
Exemption From Liability
We cannot guarantee that the information which relates to the technical pro-
perties of the product or to the product itself contained in this document is
correct. The product and, where applicable, its accessories, described in this
document are subject to constant improvement and further development.
For this reason, we reserve the right to modify components, accessories,
technical specifications and related documentation of the product described
herein at any time without notice.
All manuals and user guides at all-guides.com
14