Publicité
Les langues disponibles
Les langues disponibles
Bolt
Wrench
17. Assemble the Outside Panel Rollers
NOTICE: There is a triangle shape molded on one of the flats of the roller.
Orient the door panel so that the handle holes are on the opposite side as the showerhead and the
label faces the outside of the shower.
Position the roller and gasket on the same side of the panel as the label as shown, and insert the
roller cam into the hole.
Orient the roller so that the triangle is pointing up. This sets the door at its lowest position, making
adjustments easier.
Firmly handtighten the roller to the glass with the gasket and bolt.
Using the supplied wrench, securely tighten the bolt at least 3/4 turn past hand-tight. The gasket
may flex as the bolt is tightened.
Repeat these steps for the second roller.
1380408-2-B
All manuals and user guides at all-guides.com
Bolt
Gasket
20
Gasket
Triangle Up
Kohler Co.
Publicité
