Publicité
Les langues disponibles
Les langues disponibles
ENGLISH
MAINTENANCE
BATTERY REPLACEMENT
When the Power On / Low Battery Indicator indicator 8 is is
blinking, the batteries must be replaced.
1. Loosen screw from battery door.
2. Replace 3 x AAA batteries (note proper polarity).
3. Replace battery door and fasten securely with screw.
To avoid risk of electric shock, unplug from any voltage
source before removing battery door.
To avoid risk of electric shock, do not operate tester while
battery door is removed.
Be sure tester is turned off and wipe with a clean,
dry lint-free cloth. Do not use abrasive cleaners or
solvents.
Remove the batteries when tester is not in use for a prolonged period
of time. Do not expose to high temperatures or humidity. After a period
of storage in extreme conditions exceeding the limits mentioned in
the General Specifications section, allow the tester to return to normal
operating conditions before using.
WARRANTY
www.kleintools.com/warranty
DISPOSAL / RECYCLE
Do not place equipment and its accessories in the trash. Items must
be properly disposed of in accordance with local regulations. Please
see www.epa.gov or www.erecycle.org for additional information.
CUSTOMER SERVICE
KLEIN TOOLS, INC.
450 Bond Street
Lincolnshire, IL 60069
1-877-775-5346
customerservice@kleintools.com
www.kleintools.com
6
CLEANING
STORAGE
ESPAÑOL
MANUAL DE INSTRUCCIONES
Probador de tomacorrientes
Probador de tomacorrientes
GFCI / AFCI
• INSPECCIONA Y REVISA
LOS DISPOSITIVOS AFCI
Y GFCI
• PRUEBA LAS CONDICIONES
DE CABLEADO EN
TOMACORRIENTES
• DETECTA E IDENTIFICA
LAS FALLAS DE
CABLEADOS COMUNES
2 m
IP40
RT310
7
Publicité
