Publicité
Les langues disponibles
Les langues disponibles
OPERATION OF THE HOB
Switch on the keep warm function
1. Switch on the hob and put a suitable pan on a cooking zone.
2. Touch the cooking zone key of the desired cooking zone.
The '0' of the selected cooking zone will light up clearly and a single beep sounds.
▷
3. Touch the keep warm key.
▷
The keep warm symbol 'u' appears in the display. The keep warm function is selected.
4. Set the power level to '0' or touch the keep warm key to switch off the keep warm function.
Connecting the Bridge induction cooking zones
Two Bridge induction cooking zones can be connected to each other. This creates one large
zone that can be used, for example, with a grill plate or a fish pan on the same power level. The
pan must be large enough to cover the centres of the front and rear bridge induction cooking
zone (at least 22 cm).
Connection of Bridge induction cooking zones
1. Switch on the hob.
2. Simultaneously touch the left-hand side or right-hand side cooking zone keys.
▷
The rear cooking zone display shows a connection symbol to indicate that the two
cooking zones are connected.
3. Set the power level by touching the slide control.
The front cooking zone display shows the power level.
▷
EN 16
Publicité
