Bosch EasyComfort TDS4070 Notice D'utilisation page 16

Using your appliance
2x
16
BO S C H
1. Filling the water tank
This appliance has been designed to use normal tap
water.
Important: Do not use additives! The addition of other
liquids, such as perfume, vinegar, starch, condensation
water from tumble dryers or air conditioning systems, or
chemicals will damage the appliance. Any damage
caused by the use of the aforementioned products will
make the guarantee void!
1 Open the illing lid (9).
2 Fill the water tank (7). Never ill beyond the level
"max" (8) for maximum illing !
Close the illing lid.
3
Tip: To prolong the optimum steam function, you may mix
tap water with distilled or demineralised water 1:1. If the
tap water in your area is very hard, mix tap water with
distilled or demineralised water 1:2.
ºC
2. Heating
1 If your steam station is equipped with an iron lock
system (11*), release the iron by pressing the
button.
2 Unwind the supply hose (4) and the mains cable (5).
Plug mains cable into an earthed socket.
3 Press the button (2) to switch the appliance on.
The indicator light (2) will lash indicating that the
appliance is heating up.
4 When the iron is ready to use, the indicator light (2)
will remain permanently lit. Two beeps will be heard.
Important: During the irst seconds of use the amount of
steam will be lower and it will increase progressively.
* Model dependent