Atag OX9511H Notice D'utilisation page 62

USE
Using the timer
P
A
U
T
O
P
A
U
T
O
P
A
U
T
O
EN 8
The timer has different functions:
Clock timer
• This timer will give off an acoustic signal after the time period has
expired. The oven does not have to be in use for this to happen.
Baking time
• When the baking time set has elapsed, the oven will switch off
automatically.
End time
• When the end time set has elapsed, the oven will switch off
automatically.
Baking time and end time
• When the end time set has elapsed, the oven will switch off
automatically. The baking time set determines when the oven will
be switched on.
This function is used to automatically switch the oven on and off.
The switch-on time of the oven is calculated by inputting an end
time and the baking time required.
Changing the timer pitch
1. Simultaneously press the buttons '–' and '+'.
A point of light will flash between the figures on the timer.
2. Press the 'time button'.
The indicator 'ton1' will appear on the timer screen.
3. Repeatedly pressing the '–' button will change the pitch of
the clock timer.
Setting the time on a clock timer
1. Hold the 'time button' for a few moments till the 'timer symbol'
between the figures on the timer starts flashing.
2. Set the alarm time of the clock timer using the '–' and '+' buttons.
You will hear a beep and the display will show the current time.
The clock timer is programmed.
An acoustic signal will go off after the time set has elapsed and the
'timer symbol' will begin flashing.
3. Press any key to switch off the acoustic signal.
The 'timer symbol' continues to flash.
4. Hold the 'time button' in for a few moments to end the clock timer
function.