Korg PANDORA stomp EFGSJ 1 Manuel D'utilisation page 36

Troubleshooting
If the PANDORA stomp does not function as you expect, please check the following
points first.
○ Power does not turn on.
• Is a battery installed? Alternatively, is the AC adapter or USB cable connected
correctly and securely?
○ No sound
• Are your guitar or bass, amp and/or headphones connected to the correct jacks?
• Is your amp turned on and set correctly?
• Are any cables broken?
If you can hear sound from headphones connected to the unit, there may be a
problem somewhere after the output stage.
• Check to make sure that the program level is not set to "0" or a low value.
• Make sure that the volume level for the OUTPUT jack is not set to "0" or a low
value.
• Is the PANDORA stomp muted?
Be aware that if all effects are off, the chain display will disappear, and it will
not be possible to distinguish Bypass or Mute from the LCD display.
• Is the volume of your guitar turned down?
36