Korg PANDORA stomp EFGSJ 1 Manuel D'utilisation page 27

2 Release your fingers from the buttons when the LCD indicates "PX STOMP."
The LCD will ask "RELOAD?"
3 Press the UTILITY(ENTER) button.
The display will indicate "RELOAD", "VERIFY", "COMPLETED" for a short
time, and the factory‐set programs will be re‐loaded into the user program area.
Then the power‐on screen will appear.
If you decide not to reload, press the PLAY/EDIT(EXIT) button while the
"RELOAD?" indication is still shown. The factory programs will not be reloaded; the
normal power‐on screen will appear, and the PANDORA stomp will be in Play mode.
Never turn off the power during the reload operation.
Connecting the PANDORA stomp to a computer
You can edit programs using the Editor software on a computer that's connected to
the PANDORA stomp via a USB cable.
Using the Editor software
You can edit the PANDORA stomp's programs and manage the library by using the special
Editor software that's installed on your computer along with the Korg USB‐MIDI driver.
You can download the Korg USB‐MIDI driver and Editor software from the follow‐
ing Korg website: http://www.korg.com/ For more information on installing and
using the Editor software, refer to the instruction manual for the Editor software.
27