Dri-Eaz DrizAir 1200 Manuel Du Propriétaire page 13

13
Owner's Manual
BEFORE EACH USE
Inspect the electrical cord for damage. Look for fraying, cuts, etc. Do not use the
unit if you find any damage. Contact your local authorized distributor for service.
Inspect filter. Replace if accumulation of dust and debris is visible.
NOTICE: Replace used filters only with a new Dri-Eaz 4-PRO filter part no. filter
#100250 (24 pk). Other filter types do not provide adequate filtration or airflow. Each
filter is individually wrapped to protect filtration effectiveness. Remove the wrapper
before installing the filter into the dehumidifier.
CAUTION: Dust can cause the unit to overheat and shut down. Do not operate when
excessive dust or airborne particles are present, such as during sanding or spray-
painting. Inspect and clean air filter elements and coils frequently.
IMPORTANT: Replace the 4-Pro filter whenever it has been used on a mold
remediation job or otherwise exposed to potentially dangerous contaminants.
MONTHLY
Inspect coils. Clean when dust accumulation is visible. In normal use, dust can
accumulate and can restrict airflow, reducing performance and causing the unit to
overheat. Use a vacuum cleaner with a brush tool and a soft cloth to remove any
DrizAir 1200 Owner's Manual108998K
© 2023 Legend Brands, Inc.