General Safety Instructions; Special Safety Instructions; Conformity Declaration; Specified Use - Metabo BE 622 S- R+L Mode D'emploi

Operating Instructions
Dear Customer,
Thank you for the trust you have placed in us by buying a Metabo power tool. Each Metabo power tool
is carefully tested and subject to strict quality controls by Metabo's quality assurance. Nevertheless, the
service life of a power tool depends to a great extent on you. Please observe the information contained
in these instructions and the enclosed documentation. The more carefully you treat your Metabo power
tool, the longer it will provide dependable service.
Contents

1 Conformity Declaration

2 Specified Use

3 General Safety Instructions

4 Special Safety Instructions

5 Overview
6 Special Product Features
7 Commissioning
7.1 Side handle installation
8 Use
8.1 Switching On and Off
8.2 Selection of direction of rotation
8.3 Tool change with a geared chuck (1)
8.4 Removing the chuck
9 Tips and Tricks
10 Trouble Shooting
11 Accessories
12 Repairs
13 Environmental Protection
14 Technical Specifications
1 Conformity Declaration
We, being solely responsible, hereby declare that
this product conforms to the standards and direc-
tives specified on page 2.
2 Specified Use
The machine is suitable for drilling into metal,
wood, plastic and similar materials, for screw
tapping, and for screwdriving.
The user bears sole responsibility for damage
caused by improper use.
Generally accepted accident prevention regula-
tions and the enclosed safety information must be
observed.
3 General Safety Instructions
WARNING – Reading the operating
instructions will reduce the risk
of injury.
WARNING Read all safety warnings and
instructions. Failure to follow all safety
warnings and instructions may result in electric
shock, fire and/or serious injury.
Keep all safety instructions and information for
future reference.
Before using the power tool, carefully read through
and familiarise yourself with all the enclosed safety
information and the Operating Instructions. Keep
all enclosed documentation for future reference,
and pass on your power tool only together with this
documentation.
4 Special Safety Instructions
For your own protection and the protec-
tion of your power tool, observe the
passages marked by this symbol!
Use the additional handle supplied with the
tool. Loss of control can lead to injuries.
Hold the power tool by insulated gripping
surfaces when performing an operation where
the cutting accessory may contact hidden
wiring or its own cord. Cutting accessory
contacting a "live" wire may make exposed
metal parts of the power tool "live" and shock the
operator.
Pull the plug out of the plug socket before any
adjustments or servicing are performed.
Take care to avoid gas, electricity, and water
supplies!
Metabo S-automatic safety clutch.
When the safety clutch responds, switch off the
machine immediately!
Avoid inadvertent starts by always unlocking the
switch when the plug is removed from the mains
socket or in case of a power cut.
Keep hands away from the rotating tool!
Remove chips and similar material only with the
machine at standstill.
ENGLISH
ENG
9