Samsung SMT-190D Serie Mode D'emploi page 66

USER'S MANUAL USER'S MANUAL
Chapter 12 : Appendix
 IP Router Setup Guide
IP Router Setup Guide includes the list of Routeres which
are compatible with SMT-190DN. Refer to Router User's
Manual for the detailed router setup.
Step-by-Step Examples :
Linksys (Model : WRT5G)
Netgear (Model : WGR61v)
D-Link (Model : DI-6+)
SMC (Model : 700VBR)
Caution
Other routers may be incompatible with SMT-190DN.
Step-by-Step Setup Example of IP Router
Linksys model WRT54G
1. Click the "Application and Gaming" tab.
. Click "Port Range Forward".
. Port forwarding
Row #1 :
 Application : Set this to "HTTP"
 Start and End : Set both to "From 10
to 6555"
 Protocol : Select "TCP"
 IP Address : SETUP MENU ->
5-9) NETWORK SETUP -> Check IP from
network status to apply it identically to Private
IP after DHCP setup.(Eng- Setup)
 It is not in use by any other device connected to the IP
Router including the Local PC.
 Enable : Leave this "checked"
. Click "Save Settings"
5. Close browser window.
All manuals and user guides at all-guides.com
Eng-66
Step-by-Step Setup Example of IP Router
Netgear model WGR614v4
1. Click the "Router Status"
. Click the WAN and LAN Port information.
Write down the WAN Port IP Subnet Mask number and
the LAN Port IP Address number.
You will need it later when setting up the SMT-190DN.
. Click "Advanced" and "Port Forwarding"
. Port forwarding (HTTP)
 Click "Add Custom Service"
 Service Name : Set this to "HTTP"
# Start Port and End Port : Set both to "From
10 to 6555"
 Server IP Address : SETUP MENU ->
5-9) NETWORK SETUP-> Check IP from
network status to apply it identically to Private
IP after DHCP setup. (Eng- Setup)
 It is not in use by any other device connected
to the IP Router including the Local PC.
 Make sure "Enable" is checked.
 Click "Add"
5. Close browser window.