Samsung SMT-190D Serie Mode D'emploi page 44

USER'S MANUAL USER'S MANUAL
9-4) SINGLE SCREEN DISPLAY
Initial display mode of monitor is 9 splits. If you want
to see the camera image at full mode, select a target
camera by using the CHANNEL KEY. After that, press
the ENTER SWITCH and selected camera image will be
displayed at full screen. If you press the / or /
KEY SINGLE DISPLAY MODE at this time, you can see
another camera image at full screen. For example, when
you want to see CH1 at FULL MODE after SINGLE -
displaying CH at 9 splits, please follow the instructions
below.
07/01/05 00:00:01
CAM1 CAM CAM
CAM CAM5 CAM6
CAM7 CAM8
INITIAL DISPLAY STATUS
07/07/07 00:00:01
Press CH
CH
FULL SCREEN DISPLAY of
CH
All manuals and user guides at all-guides.com
07/01/05 00:00:01
CAM1 CAM CAM

CAM CAM5 CAM6
CAM7 CAM8
Select CH1 by using CHANNEL
KEY
07/07/07 00:00:01
KEY.
CH1
FULL SCREEN DISPLAY of CH1
9-5) QUAD MODE DISPLAY
Users can switch SINGLE DISPLAY MODE and
SEQUENTIAL DISPLAY MODE to QUAD DISPLAY
MODE, or QUAD-A (QUAD-B) to QUAD-B(QUAD-A) or
PIP MODE to QUAD MODE. Press the QUAD/PAGE
KEY.
 QUAD MODE display from SINGLE MODE or
SEQUENCE MODE.
07/07/07 00:00:01
CH1
CH1 DISPLAY
 QUAD B(QUAD A) display from QUAD A(QUAD B),
07/07/07 00:00:01
CH5 CH6
CH7 CH8
QUAD B
QUAD MODE DISPLAY
of QUAD - B
Eng-
07/07/07 00:00:01
CH1 CH

Press
MODE Key
CH CH
QUAD A
QUAD MODE DISPLAY
of QUAD - A
07/07/07 00:00:01
CH1 CH

Press
MODE Key
CH CH
QUAD A
QUAD MODE DISPLAY
of QUAD - A