Samsung SMT-190D Serie Mode D'emploi page 37

USER'S MANUAL
5. Alarm Notification
This notifies the registered users of an alarm arising
situation through e-mails. At this time, a maximum of 5
stored JPEG pictures, which were stored, can be sent
together.
- Menu Configuration
Service Choose enable if you want to send the Alarm
Notifying E-MAIL.
SMTP server SMTP server of the ISP that provides SMT-190DN
address with address services. ISP's confirmation required.
Authentication Choose enable if you want to log in the SMTP of the
Login ISP providing SMT-190DN with services.
User ID ID for the SMTP server of the ISP that provides
SMT-190DN with services.
Password Password for the SMTP server of the ISP that
provides SMT-190DN with services.
Sender (E-mail) Register the Adiministrator E-mail SMT-190DN
E-mail address E-mail addresses you want to send the alarm
1 ~ notification to.
Image count FMPI images to send.
Up to 5 pictures can be sent at 0.5-second intervals.
* Some SMTP servers may not support JPEG for
warding.
Set this function after checking the SMTP server.
After completing the set up, click "Apply" button.
EX) When user who has an e-mail address
(SMT-190DN@yahoo.com) and password(156) in
YAHOO, sets "Alarm Notification" in order to send a mail
to (test1@yahoo.com).
After completing the set up, click "Apply" button.
 Image transfer in your e-mail account.
In the event of Alarm, please use PLAYER to catch
normal JPEG images. Otherwise, the image size will be
reduced to a half JPEG size. Refer to Eng- "How to
play" for the detailed usage of PLAYER
All manuals and user guides at all-guides.com
Eng-7
8-3-2) Network Configuration Menu.
1. Network Configuration
On this menu, you can change the general environment
details related to the network of the SMT-190DN Server
and check the present status.
- Menu Configuration
Network Set to "Static IP" or "DHCP"
Configuration DDNS Configuration: Set DDNS
PPPoE(DSL) Set PPPoE (DSL).
Network Ports Set "Network Port".
View Network Status Modification of HTTP and other application
network port numbers.
DDNS Configuration DDNS Configure
1-1. Network Configuration : Static IP
1) If the IP of the SMT-190DN Server is Static :
Choose "Static IP".
) Type in the IP Address you want to assign to the
SMT-190DN Server, NetMask, GateWay, DNS1, and
DNS addresses.