Samsung SMT-190D Serie Mode D'emploi page 29

USER'S MANUAL USER'S MANUAL USER'S MANUAL
3. SEARCH START
- Input [YY/MM/DD] and [HH:MM:SS] to search and
press the ENTER (
data is searched.
- Use the , , , ,
7-3) RECORD EVENT SEARCH
After pressing the search button, select the record event
search menu. The following screen is displayed.
RECORD EVENT SEARCH
ID EVENT
001 RECORD START 05/01/05
00 RECORD START 05/01/05
00 TIMER START
If you press the REC button among the data recorded in
the HDD, the data list recorded is displayed. Select the
record event list with the ,  key. Press the
ENTER button to search it.
7-4) ALARM EVENT SEARCH
After pressing the search button, select the ALARM
EVENT SEARCH. The following is displayed.
ALARM EVENT SEARCH
ID EVENT
001 ALARM START
00 MOTION START
- The data recorded on the HDD due to alarm
occurrence or motion is displayed by the recording
time. Select the ALARM/MOTION EVENT LIST by
use of the ,  key. And press the button to search
it.
7-5) LOSS EVENT LIST
The information including the channel, date and time is
displayed when VIDEO LOSS occurs.
LOSS EVENT LIST
NO CH MM/DD/YY
01.08 07/0/07
All manuals and user guides at all-guides.com
) button. And then, the related
key to change.
07/07/07 00:00:01
DATE TIME
0::8
01:0:00
05/01/05 00:9:1
07/07/07 00:00:01
DATE TIME
01/01/05 1:5:0
01/01/05 10:10:15
07/07/07 00:00:01
HH:MM:SS EVENT
0:07:8 LOSS
It is possible to check the list of next page by use of ,
 key.
7-6) POWER EVENT LIST
Displays the date and time information with the list when
the power is turned on.
It is possible to check the list of next page by use of ,
 key.
7-7) BASIC PLAYBACK
Press the PLAY/STILL button to play the data recorded in
the HDD immediately.
Playback starts displaying the following screen.
If there is no data recorded, "NO DATA" message is
displayed.
Note
- If the user is in the menu, the playback does not
start even if the PLAY button is pressed. Exit from
the menu first to start the playback.
- Press the stop button to stop the playback. If the
PLAY/STILL button is pressed again, the system
starts the playback from the last stop.
- If the final data of HDD finishes playing back, the
first data of HDD is played again.
Eng-9
07/07/07 00:00:01
POWER EVENT LIST
NO MM/DD/YY HH:MM:SS EVENT
0 01/01/05 0:07:8 POWER
0 01/01/05 0:11:56 POWER
0 01/01/05 00:: POWER
Play 07/01/05 00:00:01
CAM1 CAM CAM
CAM CAM5 CAM6
CAM7 CAM8
NO DATA