Samsung SMT-190D Serie Mode D'emploi page 25

USER'S MANUAL USER'S MANUAL
07/07/07 00:00:01
NETWORK SETTING
) Open your Internet Explorer web browser.
Using a Static (fixed) IP, You may also connect
remotely by typing in the IP address of the SMT-
190DN, Such as
http://192.168.1.200
Note
HTTP Port
Set the port to be used when connecting to
SMT-190DN in Internet Explorer and receive the
necessary files for image transmission.
The port setting is used for various network configura-
tions or a particular port etc.
Caution
A port number is reserved for TCP port and HTTP
port setting. Default values should not be changed.
However, if the IP Router is used in a network
environment, input proper values with reference to
the IP Router manual.
If the SMT-190DN is using a Router, you may also
connect remotely by typing In the WAN IP Address of the
Router and the HTTP port assigned to the SMT-190DN.
(here you must type in the port address even if it is the
default "80"), such as
http://192.168.1.200:80
1) Move to 'DHCP...' by using / KEY in NETWORK
ACCESS, then press ENTERSWITCH to set to
DHCP.
DHCP ACCESS
DNS 1
DNS 
) DNS 1 and DNS  will be automatically set to DNS as
shown above. Use / KEY to change it.
All manuals and user guides at all-guides.com
07/07/07 00:00:01
CAM1
07/07/07 00:00:01
168.16.6.1
168.16.6.
) After setting, move to the main screen by using the
MENU button.
) Set values will be stored as shown below.
It takes 0 to 5 seconds.
07/07/07 00:00:01
NETWORK SETTING
5) You can view the video source of the SMT-190DN
from a remote location PC.
6) Open your Internet Explorer web browser, type in the
following in the URL window and press Enter.
http://wff0000.websamsung.net
 Where ff0000 is the MAC address of your
SMT-190DN in this example. If your SMT-190DN
MAC address is ff0001, then type in ff0001
instead of ff0000.
Note
MAC Address.
Locate the MAC Address of the
SMT-190DN
has its own unique MAC address)
It can be checked in "5-9) NETWORK SETUP" of
SETUP MENU'. It is the last 6 digits as shown below.
1. NETWORK ACCESS
. HTTP PORT
. PICTURE QUALITY
NETWORK STATUS
Caution
If you change the HTTP port number 80 to 1025, then
you must type in as the address bar below. The de-
fault port number is 80. You may need to change the
port number if you cannot link to the security system
from a remote location due to a firewall or if you have
other issues.
http://wff0000.websamsung.net:1025
 At this time, you should add "w" in front of "mac
address".
Eng-5
07/07/07 00:00:01
CAM1
SMT-190DN
07/07/07 00:00:01
NETWORK SETTING
STATIC...
00080
NORMAL
IP ADDR 19.168.1.
GATEWAY 19.168.1.65
SUBNETMASK 55.55.55.0
DNS 1 168.16.6.1
DNS  168.16.6.
MAC ADDR 00:0:6f:ff:00:00
DDNS ADDR wff0000.websamsung.net
(each