Cafe CDT828 Serie Manuel Du Propriétaire page 19

Loading
For best dishwashing results, follow these loading guidelines. Features and appearance of racks and CustomFit
Baskets may vary from your model.
CustomFit Top Rack (on some models)
The CustomFit Top Rack is the recommended location
for silverware and large utensils
Take care when loading, unloading,
CAUTION
or transporting the silverware or
utensil tray. The tray may contain sharp or heavy
items. If items are dropped from the tray or the tray
is dropped, injury could occur.
Optional Loading Patterns - CustomFit Top Rack with Silverware Caddy (on some models)
Models - CD*828
Optional Loading Patterns - CustomFit Top Rack with Ultra Wash (on some models) and Silverware
Caddy (on some models)
Models - CD*858, CD*888
Slide the CustomFit Top Rack to the Left to Allow Large or Tall Items to be Placed in the Middle Rack
The CustomFit Top Rack is also removable to allow extra large items to be placed in the middle rack:
To remove the CustomFit Top Rack:
18
IMPORTANT NOTES:
Do not allow cutlery of different materials to touch each
other in the CustomFit Top Rack. Doing so may cause
discoloration of the cutlery.
The tray is only meant to be used with a Café CustomFit
Top Rack dishwasher to hold silverware, cooking
utensils, and other small items. Using the tray for any
other purpose could result in damage to the tray or
damage to anything interacting with the tray.
Ensure that the CustomFit Top Rack is fully closed before
shutting the dishwasher door. Shutting the door with the rack
partially extended could cause damage to the dishwasher.
1
With the rack fully extended, lift the front of the rack so that
the rack roller wheels clear the retaining hook.
2
Continue to pull the rack until the remaining rack roller
wheels clear the retaining hook.
3
Replace the rack by aligning the rack roller wheels on the
retaining hook and rack rails – Ensure all roller wheels are
located on top of the rack rails.
49-4000289 Rev 0