Publicité
Les langues disponibles
Les langues disponibles
Getting Started
Start Dishwasher
6
Start
Press the Start pad and close the door within 4 seconds to start the cycle or begin the Delay
countdown. The wash cycle will begin shortly after closing the door. The display will turn off if the
door remains open for two minutes. To activate the display, close and open the door or press
any pad.
Interrupt or
To interrupt or pause a dish cycle, slowly open the door. Opening the door will cause the wash
Pause
cycle to pause. The dishwasher will beep every minute to remind you to close the door. To restart
or resume the cycle, press Start, and close the door within 4 seconds.
Cancel
To cancel a wash cycle, press and hold the Start pad for 3 seconds and close door.
The dishwasher will drain, emit a beep sound, and the wash cycle light will turn OFF.
Cycle Indicator Lights and Sounds
7
Sanitized
Displayed at end of the cycle when Presoak+Sanitize/Sani has been selected and dishwasher
has met requirements for sanitization. See Presoak+Sani, for complete description. Closing door
or pressing any pad will turn off light.
Clean
Displayed when a wash cycle is complete. The light stays ON as a reminder that the dishes are
clean. The light will turn off when the door is opened.
Cycle
The indicator light on the door front will change color to indicate the wash status. During the
Status
wash cycle, the indicator light will be amber. When the wash cycle is complete, the light will
(on some
change to white.
models)
Sounds
The dishwasher will emit a sound to indicate cycle completion, pad presses, and door ajar. To
mute all sounds, press the Dry pad 5 times within 5 seconds. Repeat this process to turn sounds
back on.
Mute
To turn the dishwasher control sounds ON/OFF, press the Dry pad 5 times within 5 seconds.
Sabbath/
To turn this option ON/OFF, press and hold the Auto and Hi Temp Wash pads for 5 seconds,
Door
close the door and wait 3 minutes for the dishwasher to go into sleep mode. In the OFF mode,
Wake Up
the control display, control sounds, and interior lights
Mode
door opening/closing. This mode can be used when observing certain religious holidays such as
(on some
the Sabbath. To activate the control and interior lights
models)
Smart
Connecting your dishwasher to SmartHQ will unlock enhanced capabilities and information
Assist
for the Smart Assist feature to maintain optimal wash and dry performance. Smart Assist is
(on some
designed to monitor your dishwasher's functionality and will help ensure optimal performance.
models)
See section Appliance Communication for instructions on how to connect.
49-4000289 Rev 0
(on some models)
will not respond to the
(on some
models), press any pad.
9
Publicité
