Publicité
Les langues disponibles
Les langues disponibles
7.0 minimum combustible mantel clearances
WARNING
!
•
Risk of fire. Maintain all specified air space clearances to combustibles. Failure to comply with these
instructions may cause a fire or cause the appliance to overheat. Ensure all clearances (i.e. back, side, top,
vent, mantel, front, etc.) are clearly maintained.
•
When using paint or lacquer to finish the mantel, the paint or lacquer must be heat resistant to prevent
discolouration.
•
Installing a television or other electronics above the appliance may cause discolouration, melting, or damage
to the electronics. Use clearances as guidelines and refer to your TV manufacturer's instructions for further
information.
MANTEL DEPTH
MANTEL
HEIGHT
2" (5.1cm)
25 11/16" (65.2cm)
A
Optional hearth
extension
Bottom of the
Top of
12" (30.5cm)
finishing flange
0"
clearance
(projection
4" (3.8cm)
to finishing
max.
flange)
projection
Bottom of
finishing flange
2" (5.1cm)
appliance
Installing a mantel between this appliance
and electronics or other materials that may
be sensitive to heat, will reduce the effect of
direct heat on them. Follow mantel height
and depth instructions for proper clearance
information. A non-combustible mantel is
considered a non-combustible protrusion.
W415-2968 / C / 03.29.23
finishing
EN
19
Publicité
