Publicité
Les langues disponibles
Les langues disponibles
6.1
sleeve extension installation
1. Loosen screws and slide the extension out until its flush with the finish material.
2. Tighten screws.
Not extended
IMPORTANT:
* The minimum clearance from combustible material must be maintained top and sides
from the extension sleeve.
L
Fully extended
1/2" min.*
Sleeve
extension
Sleeve
Finishing
material
finish framing
6.0 finishing
Type 1
1/2" min.*
Sleeve
extension
2"
Sleeve
Finishing
material
W415-2968 / C / 03.29.23
EN
17
Publicité
