Publicité
Les langues disponibles
Les langues disponibles
3.4. Maintenance & Lubrication
Storage
It is good practice to clean off any dirt and grease that may have accumulated on
the mower and to inspect and make necessary repairs before parking the unit at
the end of the working season and for long periods. This will help ensure that the
mower will be ready for use the next time you hook-up to it.
DANGER!
Always disconnect main driveline from tractor PTO and secure mower in the up
position with solid supports before servicing underside of the mower.
1. Remove any dirt and grease that may have accumulated on the mower and
moving parts. Scrape off compacted dirt from under the hood and then wash the
surface thoroughly with a garden hose.
2. Check rotor blade and blade bolts for wear and replace if necessary. See "Rotor
blade Replacement".
3. Inspect mower for loose, damaged, or worn parts and adjust or replace as
needed.
4. Repaint parts where paint is worn or scratched to prevent rust.
5. Replace all damaged or missing labels.
6. A light coat of oil or grease may also be applied to areas where paint has worn
off to minimize oxidation.
7. Lubricate as noted under "Lubrication Points".
8. Store equipment on a level surface in a clean, dry place. Inside storage will
reduce maintenance and make for a longer mower life. Position the unit on a flat
surface with jack stands lowered to a suitable 3-Point height. Ensure that the
main frame is stable.
9. Store driveline end off the ground.
Publicité
