Searching And Playing Tracks - Sony WX-XB100BT Mode D'emploi

To match the volume level of the BLUETOOTH
device to other sources
Start playback of the BLUETOOTH audio device at a
moderate volume, and set your usual listening
volume on the unit.
Press MENU, then select [SOUND]  [BTA VOLUME]
(page 19).

Searching and Playing Tracks

Repeat play and shuffle play
Not available when a USB device in Android mode is
connected.
1
During playback, press
(shuffle) repeatedly to select the desired
play mode.
Playback in the selected play mode may take
time to start.
Available play modes differ depending on the
selected sound source.
Searching a track by name (Quick-
BrowZer™)
Not available when a USB device in Android mode
or iPod is connected.
1
During CD, USB or BT AUDIO*
press (browse)*
search categories.
When the track list appears, press
repeatedly to display the desired search
category.
*1 Available only for audio devices supporting
AVRCP (Audio Video Remote Control Profile) 1.4
or above.
*2 During USB playback, press
more than 2 seconds to directly return to the
beginning of the category list.
2
Rotate the control dial to select the
desired search category, then press it to
confirm.
3
Repeat step 2 to search the desired track.
Playback starts.
To exit the Quick-BrowZer mode
Press (browse).
12
GB
(repeat) or
1 playback,
2 to display the list of
(back)
(browse) for
Searching by skipping items
(Jump mode)
Not available when a USB device in Android mode
or iPod is connected.
1
Press (browse).
2
Press  (SEEK +).
3
Rotate the control dial to select the item.
The list is jumped in steps of 10% of the total
number of items.
4
Press ENTER to return to the Quick-
BrowZer mode.
The selected item appears.
5
Rotate the control dial to select the
desired item, then press it.
Playback starts.