Publicité
Les langues disponibles
Les langues disponibles
EXHAUST CONNECTION
7
WARNING
TO REDUCE THE RISK OF FIRE OR
PERSONAL INJURY:
your washer. This will permit direct access for easier exhaust
connection.
foil-type) duct to connect the dryer to the home exhaust duct.
It must be installed in accordance with the instructions found
in "Connecting the Dryer to House Vent" on pages 7-8 of this
manual.
concealed space of a building. The accumulated lint could create
exhaust system. A combination of grease and lint could create a
hazard.
DO NOT use a plastic vent.
DO NOT use a metal foil vent.
No roof venting.
the duct. These fasteners can accumulate lint, crating a potential
system, especially at turns and joints. Exhaust system shall be
inspected and cleaned at least once a year. Failure to follow
1" = 2.5 cm
1' = 0.3 m
All manuals and user guides at all-guides.com
Installation Instructions
Fire Hazard
STANDARD REAR EXHAUST
For straight line installation, connect
the dryer exhaust to the external
exhaust hood using duct tape or
clamp.
EXTERNAL DUCT
OPENING
DUCT TAPE OR
DUCT CLAMP
4" METAL DUCT CUT
TO PROPER LENGTH
DUCT TAPE OR
DUCT CLAMP
NOTE: WE STRONGLY RECOMMEND SOLID
FLEXIBLE DUCTING IS USED IT MUST BE
STANDARD REAR EXHAUST
ELBOW HIGHLY
RECOMMENDED
NOTE: ELBOWS WILL PREVENT DUCT KINKING AND
CONNECTING THE DRYER TO HOUSE VENT
RIGID METAL TRANSITION DUCT
recommended.
UL-LISTED FLEXIBLE METAL (SEMI-RIGID) TRANSITION DUCT
(semi-rigid) ducting can be used (Kit WX08X10077).
enclosed spaces.
7
ELBOW HIGHLY
RECOMMENDED
RECOMMENDED
D
CONFIGURATION
TO MINIMIZE
EXHAUST
BLOCKAGE
Publicité
