GE GTDL740EDWW Instructions D'utilisation page 16

REVERSING THE DOOR SWING
17
GLASS PANEL DOOR MODELS:
GTDS810ED0WS
GTDS810GD0WS
GTDS815ED0MC
GTDS815GD0MC
GTDS820ED0WS
GTDS820GD0WS
GTDS825ED0MC
GTDS825GD0MC
GHDS830ED0WS
GHDS830GD0WS
GHDS835ED0MC
GHDS835GD0MC
Open the door to approximately 170 degrees.
1
With a putty knife, remove the 4 plastic covers located along
the left side of front panel and set them aside.
Plastic Cap (4)
Remove the bottom screw from each hinge (right side) and
2
partially insert them into the top left side hinge holes.
NOTE: All 4 front panel hinge screws will now be in the top
hinge holes - 2 on the left and 2 on the right.
All manuals and user guides at all-guides.com
Installation Instructions
GTDS850ED0WS
GTDS850GD0WS
GTDS855ED0MC
GTDS855GD0MC
GTDS860ED0WS
GTDS860GD0WS
GTDS865ED0MC
GTDS865GD0MC
GTMS820EDWS
GTMS820GDWS
GTMS855EDMC
GTMS855GDMC
Left side of
front panel
Loosen the bottom 2 right side hinge screws. Remove the door
3
Remove both the Blind Plate and the Strike Plate and install
them in opposite positions.
Blind plate
Remove the 4 door hinge screws, 4 edge screws, and
4
screwdriver.
Door hinge
screws
16
Inner door
Strike plate
Inside screws
Inner door
Inside screws
Outer door
Edge
screws