PRO-POINT 8364945 Mode D'emploi page 9

8364945
LED INDICATION FUNCTION
The Battery Pack has a "SW" button and 4-step green LEDs for indicating remaining capacity status and over
temperature condition. The remaining capacity (RC) and temperature protection status green LED indications
(3 seconds) when the "SW" button is momentarily pressed.
Remaining Capacity LED Indication
LED 1 (green)
LED 1, 2 (green)
LED 1, 2, 3 (green)
LED 1, 2, 3, 4 (green)
LED 1 Blinking (0.25Sec/green)
LED 1, 2, 3, 4 Blinking (0.5sec/ green)
THE LED LIGHT ON THE CHARGER
WARNING!
1. Charger is plugged into a 100 to 240V AC outlet only.
2. If the battery pack is too hot or too cold, the charger will not fast charge the battery pack and the red Indicator
light is "blinking". The charger will automatically begin charging when the battery pack temperature returns to
between 0°C (32F) and 50°C (122°F).
3. If both red and green indicator lights are "ON" the battery pack either does not comply or is defective. Please
contact Princess Auto.
4. Do not charge the battery pack in the rain, snow or high temperature environment.
5. Do not charge battery pack when environment temperature is below 0°C (32°F) or above 40°C (104°F)
6. If the battery pack is cold (below 0°C), allow it to warm up for one hour at room temperature before charging.
A cold battery may not charge fully.
7. Remove the plug after finishing the charge.
8. Do not use a generator to charge the battery pack.
For technical questions call: 1-800-665-8685
All manuals and user guides at all-guides.com
18V Cordless Impact Driver
RC Status
0%- 25%
26%-50%
51%-75%
76%-100%
Fully Depleted
Over Temperature condition
Power On
(Green light flashes slowly)
Battery charged 100%
(Green light stays illuminated)
Battery Low Battery charged 80%
(Red light stays illuminated) (Green light flashes rapidly)
Battery Pack temperature Battery Pack malfunction
is too hot or too cold (Red and Green lights stay
(Red light flashes slowly) illuminated)
V 2.0
9