GE 27956 Mode D'emploi page 31

Deleting All Redial Records
1. Make sure the phone is OFF (not in talk mode).
. Use the cid/vol (3or4) button to display any redial record.
. Press the menu button.
4. Use the cid/vol (3or4) button to scroll to Delete all?.
5. Press the menu button. The screen displays Confirm? .
6. Press the menu button again to confirm the deletion. The screen displays All
deleted.
NOTE: Press the flash/exit button to return to the standby mode
without deleting any redial records.
Call Timer
After you press the talk/call back button on the handset, the built-in call timer shows on the
display and counts the length of time of the call in hours, minutes and seconds.
Auto Standby
If you place the handset in the cradle while the handset is off the hook (during a call),
the call is automatically disconnected.
Ringer On/Off
1. Make sure the phone is OFF (not in talk mode).
. Press the mute/clear/ringer on/off button to switch the ringer on or off.
NOTE: If you turn the ringer OFF, the screen displays RINGER OFF.
Flash
If you subscribe to the combined Call Waiting Caller ID service from your local
telephone company, you will receive Caller ID information (if available) on Call Waiting
calls. During a phone call, you will hear a beep to indicate another call is waiting on
the line and the handset screen displays the Caller ID information for the waiting call.
• To connect to the waiting call, press the flash/exit button on the handset, and
your original call is put on hold.
• To switch between the two calls, press the flash/exit button.
TIP: Do not press the talk/call back button on the handset to
activate a custom calling service, such as call waiting, or the call
will disconnect.
All manuals and user guides at all-guides.com
1