GE 27956 Mode D'emploi page 14

Changing the Photo Frame
Detaching the Photo Frame;
Push on the tabs gently until they
pop loose.
Attaching the Photo Frame;
Align the frame (refer to the
markings on the back of the
frame for the correct placement)
and gently snap onto the base.
Wall Mounting
NOTE: Remove the wire stand, if attached, by pressing on the tabs
and sliding each leg out individually.
1. Connect the AC power adaptor into the electrical outlet and the DC connector into
the jack on the back of the base.
. Connect one end of the telephone line cord into the jack on the back of the base,
feed the line cord through the groove, then connect the the other end into the
modular telephone jack.
. Slip the mounting holes (on the back of the base) over the wall plate posts and
firmly slide the unit down into place.
14
All manuals and user guides at all-guides.com