Hitachi HARC-BX E Manuel D'installation page 7

All manuals and user guides at all-guides.com
2.3. Name of Parts (Control Board)
(*) 8P DSW No.1 S201:
Read 5.1 "Setting of Dip Switch" for the detail and function of HARC-BX E .
(**) 8P DSW No.2.S202:
Read 5.1 "Setting of Dip Switch".8P DSW No.1 and No.2 are used for self-inspection. for
details, refer to the 6.1 "Self-Inspection of HARC-BX E ".
(***) 7-Segment:
Read 5.2 "Test Run" 5.3 "Abnormal Indication" for the details of 7-Segment's display.
SYSTEM CONSTITUTION
PSW No. 1 (M.CLR): Push Switch for
checking connected unit quantity
7-Segment (*): Present state of
HARC-BX E
PSW No.2 (LON-SERV): Push Switch for
transmission neuron ID. (Service Pin)
8P DSW No. 1 (S201) (**): Dip Switch
System Setting of HARC-BX E
8P DSW No. 2 (S202) (***): Dip Switch for
setting Functions of HARC-BX E .
Power Source Display LED (PWR): Light
is ON when the pòwer is supplied.
Transmission Display LED (H-L):
Transmission state with H-LINK
Transmission Display form Upper
System LED (LON): Transmission state
with Upper Monitoring Equipment
/
2 5