Tecno-gaz ONYX B 6.0 Mode D'emploi page 56

ENGLISH
06
The autoclave is shipped in a suitable package to be transported and moved easily and to
protect its contents.
The packaging must not be subject to impact, must be handled with care and avoid
dropping it or roll it.
In case autonomous handling means are not available handle the packaged autoclave
always in two persons.
Autoclave is placed on wooden pallet and packed with corrugated cardboard internal and
external application.
For remove the autoclave to its pack please remove first the corrugated cardboard. For lift
the autoclave please use the belts.
The autoclave shall have to be handled by at least two people and by using
belts only
Do not lift the autoclave from the inferior part of the door or command panel,
this incorrect operation can create problems of a mechanical nature.
ATTENTION: Always conserve original packaging.
Inside the package you will find the following documents:
 USER'S MANUAL: to be read with attention and kept in a place available to all operators
assigned to sterilization.
 CERTIFICATION: which must be conserved.
 INSTALLATION REPORT - TESTING AND GUARANTEE CONDITIONS: must be
completed upon installation of the machine following the instructions indicated on the
form.
 QUICK USE GUIDE: should be kept in the vicinity of the machine.
 CERTIFICATION OF SAFETY WALVE.
8
UNPACKAGING