Publicité
Les langues disponibles
Les langues disponibles
Sink Groove
Top Brack-
et
Bottom Bracket
4. Install the Top Brackets
- Set the sink on the cabinet so the edges line up with the cabinet sides
and back.
- Hang the top bracket sections from the side and back grooves of the
sink, and position them over the bottom bracket sections.
- Loosely assemble the bracket sections with the screws.
- Make sure the sink has not moved out of position. Carefully thread
the screws to tighten the brackets and secure the sink in place. Do
not overtighten.
5. Connect the Supplies
- Connect the strainers to the trap and drain assemblies. Follow the
strainer manufacturer's instructions.
- Connect the faucet supply lines and complete the faucet installation.
Be sure to follow all instructions packed with the faucet.
- Inspect for leaks.
6. Clean Up
- Do not use abrasives on this product, as they will scratch and ruin
the surface finish.
- Remove stubborn stains, paint, or tar with turpentine or paint
thinner.
Kohler Co.
All manuals and user guides at all-guides.com
5
Trap
B
1007313-2-
Publicité
