Publicité
Les langues disponibles
Les langues disponibles
Sink Groove
Bracket Assembly
Bottom Bracket
Cabinet
Wall
1. Mark the Bracket Locations
CAUTION: Risk of personal injury or product damage. Large sinks
are very heavy. Get help lifting the sink.
- Position the sink directly on the cabinet. Verify the cabinet size and
sink fit - the side edges of the sink should line up with the edges of
the cabinet.
- Assemble the brackets with the screws provided. Thread the screws
only halfway into each bracket.
- Hang two bracket assemblies from each of the side and back sink
grooves, and position them as shown. Make sure the bottom of the
sink rim touches the top of the cabinet.
- Hold the bottom bracket sections against the 3/4" (2cm) thick cabinet
walls, and mark the hole locations.
- Remove and disassemble the brackets.
- Remove the sink from the cabinet.
Kohler Co.
All manuals and user guides at all-guides.com
12" (30.5cm)
5" (12.7cm)
Bracket
5" (12.7cm)
Countertop
Sink
Cabinet
3
Finished Wall
TOP VIEW
Countertop
Front of Cabinet
1007313-2-
B
Publicité
