Scanner Settings; Energy Consumption - HP Scanjet N6310 Guide De Démarrage Rapide

• "Use the transparent materials adapter (TMA)" on page 17
• "Start a scan" on page 18

Scanner settings

The Setup ( ) button allows you to modify scanner settings.
NOTE: For Windows: You can change additional settings through the HP scanning
software. Double-click the HP Scanning icon on the desktop, and then select an
option from the Options menu. For more information, click Help in the
HP Scanning shortcuts dialog box.
TIP: If you change settings and later want to restore them to their defaults, press the
Setup ( ) button on the scanner control panel and select Restore Defaults.
Language
To select the language shown on the LCD, follow these steps:
1. Press the Setup ( ) button, use
OK.
2. Use
and
language selection, and then press OK to exit.

Energy consumption

You can reduce the scanner's energy consumption with the following settings:
• Instant Warm-up: By default, this setting reduces the time it takes for the lamp to
turn on, allowing you to scan or copy more quickly. Setting Instant Warm-up to
OFF increases the time required for the lamp to warm up, but reduces energy
consumption.
• Energy Savings: By default, this setting reduces scanner power consumption after
a period of time. Setting Energy Savings to OFF increases power consumption, but
reduces the time required when you begin scanning or copying.
If you set Instant Warm-up to OFF or Energy Savings to ON, pressing the Power button
restores full power to the scanner.
To change energy consumption settings, follow these steps:
1. Press the Setup ( ) button, use
want is selected, and then press OK.
2. Use
and
then press
NOTE: Setting Energy Savings to ON reduces power to all parts of the scanner,
including the scanner lamp. As a result, setting Instant Warm-up to OFF when
Energy Savings is set to ON has no effect.
and
until the language you want is selected, press OK to confirm the
or
until the setting you want (ON or OFF) is selected, press OK, and
twice.
to select Language, and then press
until the energy consumption setting you
Scanner settings 11