EINHELL GE-EH 6560 Instructions D'origine page 14

3. Proper use
Important. This hedge trimmer is suitable for cut-
ting hedges, bushes and shrubs.
The equipment is to be used only for its prescri-
bed purpose. Any other use is deemed to be a
case of misuse. The user / operator and not the
manufacturer will be liable for any damage or inju-
ries of any kind caused as a result of this.
Please note that our equipment has not been de-
signed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.
4. Technical data
GE-EH 6560
Mains voltage ..........................220-240 V~ 50 Hz
Power input ............................................... 650 W
Idling speed .......................................1,500 min
Cutting length ......................................... 600 mm
Cutter rail length ..................................... 660 mm
Tooth spacing ........................................... 30 mm
Max. cutting thickness .............................. 18 mm
Cuts/min ...................................................... 3000
Protection class ............................................ II/
Weight ......................................................3.75 kg
GE-EH 7067
Mains voltage ..........................220-240 V~ 50 Hz
Power input ............................................... 700 W
Idling speed .......................................1,500 min
Cutting length ......................................... 670 mm
Cutter rail length ..................................... 710 mm
Tooth spacing ........................................... 30 mm
Max. cutting thickness .............................. 18 mm
Cuts/min ...................................................... 3000
Protection class ............................................ II/
Weight ........................................................3.8 kg
Danger!
Sound and vibration
Sound and vibration values were measured in
accordance with EN 62841.
GE-EH_6560_7067_SPK13.indb 14 GE-EH_6560_7067_SPK13.indb 14
GB
L sound pressure level ..................... 82.2 dB(A)
pA
K uncertainty ............................................. 3 dB
pA
L sound power level ..................... 95.36 dB(A)
WA
K uncertainty ............................................. 3 dB
WA
Wear ear-muff s.
The impact of noise can cause damage to hea-
ring.
Total vibration values (vector sum of three direc-
tions) determined in accordance with EN 62841.
Vibration emission value a
K uncertainty = 1.5 m/s
The stated vibration emission levels and stated
noise emission values were measured in ac-
cordance with a set of standardized criteria and
can be used to compare one power tool with
another.
The stated vibration emission levels and stated
noise emission values can also be used to make
an initial assessment of exposure.
-1
Warning:
The vibration and noise emission levels may vary
from the level specifi ed during actual use, depen-
ding on the way in which the power tool is used,
especially the type of workpiece it is used for.
Keep the noise emissions and vibrations to a
minimum.
•
Only use appliances which are in perfect wor-
king order.
•
Service and clean the appliance regularly.
•
Adapt your working style to suit the appliance.
-1
•
Do not overload the appliance.
•
Have the appliance serviced whenever ne-
cessary.
•
Switch the appliance off when it is not in use.
•
Wear protective gloves.
- 14 -
= 3.106 m/s
2
h
2
17.04.2023 09:57:03 17.04.2023 09:57:03